Cypress CMLUX-42S Spécifications télécharger pdf (Page 8)

7. Operation Controls and Functions

The following sections describe the hardware components of the unit.

7.1 Front Panel

①

LCM monitor: This monitor displays your setting information with each

output and input selection.

②

IR sensor.

③

POWER: Press this button to turn on the system. When system is ON the LED

will illuminate in GREEN. Press it again to enter into STANDBY mode, the LED

will illuminate in RED.

④

EDID: Press this button to select the EDID function from the LCM. There

will be two selection available shown in LCM; 1. TV Mode and 2. Standard

Mode, press the number key to select the desire mode. When TV Mode

is selected the LED will not illuminate, but in Standard Mode the LED will

illuminate in GREEN color. After the selection is made, press enter key to

conrm. Standard mode means the device will use internal built-in EDID

and TV mode means the device will use TV/display

’

s EDID. When EDID

switched to TV, leave as it is if the displays are properly. Factory default

setting is on TV mode.

Notes:

1. The device will detect the rst HDMI output source

’

s EDID and record in

the unit. If the rst detected output source is DVI it will pass to next

source, until the rst HDMI is detected. The detection priority is HDMI

v1.3 > HDMI v1.2 > DVI.

2. When EDID is on STD, the device will use the built-in EDID

Video Supports > 1080p 10 bits (max)

Audio Supports > PCM2

① ② ⑩③ ④ ⑤ ⑥ ⑦ ⑧ ⑨

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 19 20

Pas de commentaire

Cypress CMLUX-42S Spécifications Page 8