Cypress Chameleon CTM-15X Manuel d'utilisateur télécharger pdf (Page 7)

Chameleon Serial Upgrade Utility Notes

(Revision 1.4)

7 4BOperation

A # prompt (R1.2.X and below) or / # prompt (R1.3.X and above) will be displayed indicating you now

have access to the device command line interface. At the prompt, to determine the modem’s current

firmware version by entering the following command: cmd ver

To end the local Telnet session, type exit at the prompt.

Step 5: Configure and run the Chameleon Serial Upgrade Utility

Run the Chameleon Serial Upgrade Utility.

In the PC’s IP Address field enter 192.168.1.20 (default).

In the Modem’s IP Address field enter 192.168.1.1 (default).

Select the proper Serial Port Settings. Note that the baud rate refers to that configured in the RedBoot

boot loader (default baud rate is 115200).

1 2 3 4 5 6 7 8 9 10 11

Pas de commentaire

Cypress Chameleon CTM-15X Manuel d'utilisateur Page 7